Electrozad

The U-GAGE® T30UX is an easy-to-use ultrasonic sensor with extended range and built-in temperature compensation. Simple push button configuration provides flexibility for a variety of applications. Easy-to-see indicator LEDs communicate the status of the sensor. The Green "Power" LED ON indicates that the sensor is in Run Mode (the sensor's normal operating condition). The Red "Signal" LED indicates the target signal strength. The Amber "Output" LED indicates that the output is enabled and the sensor is receiving a signal within the window limits (depending on NO or NC). The Amber "Mode" LED indicates the currently selected mode.

Banner Engineering U-Gage™ Proximity Level Sensor, Temperature Compensation, Series: T30UX, 300 to 3000 mm Sensing Range, Ultrasonic Sensing Beam, 135 ms Response, NO PNP Output, 10 to 30 VDC, 40 mA, 114 kHz, 4-Pin M12 Cable, LED Light Source, 10 to 60 Hz, 1.58 in Dia x 1.77 in D x 2.5 in H, NEMA 6/IP67, -40 to 70 deg C Operating, Environmental Conditions: 95% at 50 deg C Non-Condensing Maximum Relative Humidity

• Built-in temperature compensation
• Fast, easy-to-use Teach-mode programming, no potentiometer adjustments
• Remote teach for security and convenience
• Compact, self-contained, right-angle sensor package with fully encapsulated electronics
• SPST solid state switch, configurable as NPN (sinking) or PNP (sourcing) via Mode push button, normally open (NO) or normally closed (NC) operation is also selectable via mode push button
• Protected against reverse polarity and transient overvoltage's
• Protected against short circuit conditions
• Time of flight sensing mode
• Teach button adjustments
• Clear object detection

• Full Engineering Drawing https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Banner_Engineering_T30UXDBQ8_Full_Engineering_Drawing.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Banner_Engineering_T30UXDB_Specification_Sheet.pdf