Electrozad

MICRO SWITCH BZ/BA/BM/BE Series premium, large snap-action switches offer precision operation and sensitive differential travel. These Series meet various international agency requirements, and are often used for precision on/off applications, as well as end of limit, presence/absence, and manual operator interface functions. Configured options with BZ, BA, BM, and BE switches provide a wide variety of operating and interface characteristics.

Honeywell MICRO SWITCH™ Basic Switch, Large Premium Standard, Series: BZ Series, 15 A at 250 VAC, 50/60 Hz, SPDT, 1 Pole, Rigid Roller Lever, 26.16 mm Actuator Length, 1.67 N Actuating, Screw Terminal, 20000000 Operating Cycles, Phenolic, Environmental Conditions: 1.5 mm Peak-to-Peak Amplitude, Frequency 10 to 55 Hz, 2 Continuous hr, 2 in L x 0.7 in W x 1 in H

• The switch's elongated mounting hole allows for easier, more accurate mounting
• Used in applications where very tight and sensitive control is required between the operate and release points
• -55 to 85 deg C operating temperature
• 2000 V between each terminal and ground dielectric strength, premium large basics SPDT
• 0.5 mm nominal break distance (minimum distance between separated mating contacts in fully open position)
• Silver contacts
• 2.39 mm over travel, 0.42 N release force
• 0.08 to 0.51 mm differential travel
• 0.33 Nm tightening torque, 25.4 mm mounting centers
• Long mechanical life up to 20,000,000 cycles at 95% survival
• Moving contact rivet construction
• Choice of actuation, termination and operating characteristics
• Accepted world-wide standard "Large Basic" switch
• Low operating force and differential travel
• Bottom facing NO 6 screws/lock washers terminal, recommended for 26.7 mm steel roller lever applications
• Plastic materia

• Catalog https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Honeywell_BA_2R708_P7_Catalog.pdf