Electrozad

The ProLinx EtherNet/IP to BACnet/IP client gateway creates a powerful connection between devices on an EtherNet/IP network and BACNET devices. This stand-alone DIN rail mounted protocol gateway provides a single EtherNet port. The EtherNet/IP protocol driver supports the explicit messaging implementation of the protocol. User configurable as both a client and a server, the EtherNet/IP port is a very powerful data transfer tool.

ProSoft Technology EtherNet/IP to BACnet/IP Client Gateway, Ethernet/IP Protocol, 50/60 Hz, RS232/422/485 Interface, 110 to 115 kbps, Serial Port, 1 Port, 5.2 in H x 2.07 in W x 4.52 in D, For Use With: PLC5/E Rev C/N, D/E, E/D/SLC5/05 Series A, OS503 frn4 Rockwell Automation Equipment, Environmental Conditions: 5 to 95% Humidity

• 18 to 32 VDC allowed positive, negative, GND terminals 2.5 mm screwdriver blade power supply
• -4 to 122 deg F operating temperature
• Power and module status, application status, serial port activity, serial port error status LED indicators
• DB-9M RS-232 only no hardware handshaking configuration serial port
• 10 base-T half duplex RJ45 connector, link and activity LED indicators, 1500 Vrms at 50 Hz to 60 Hz for 60 s electrical isolation, EtherNet broadcast storm resiliency equals less than or equal to 5000 frames/sec and less than or equal to 5 minutes duration
• Modbus plus connector two DB9 female standard modbus plus connectors are application ports
• 2500 Vrms port signal isolation per UL 1577, 3000 VDC minimum port to ground and port to logic power isolation serial port isolation