Non Stock
Square D™ Qwik-Gard® QO120GFI Circuit Breaker, 120 VAC, 20 A, 10 kA Interrupt, 1 Poles, Thermal/Magnetic Trip
| Branch Name | Available |
|---|
The ground-fault sensor in a Qwik-Gard GFCI continuously monitors the current flow in the load and neutral conductors. The sensor compares the current flow in all directions. If the current flowing back to the source is less than the current flowing out to the load, a ground fault exists. When the difference in current flow exceeds 6 milliamperes, the sensor sends a signal to trip the GFCI. The trip will be indicated by the Visi-Trip® indicator and the operating handle will move to the center tripped position.
Square D™ Qwik-Gard® Circuit Breaker, 120 VAC, 20 A, 60 Hz Frequency, 10 kA Interrupt, QO Frame, Thermal/Magnetic Trip, 1 Pole, 1 ph, Pressure Plate Connection, 12 to 8 AWG, 14 to 8 AWG Wire, Plug-On Mounting, 40 deg C, 4.12 in H x 0.75 in W x 2.91 in D Dimensions
| Connection Type | : | Pressure Plate |
| Dimensions | : | 4.12 in H x 0.75 in W x 2.91 in D |
| Frame | : | QO |
| Frequency Rating | : | 60 Hz |
| Mounting Type | : | Plug-On |
| Phase | : | 1 |
| Temperature Rating | : | 40 deg C |
| Type | : | Ground Fault |
| Wire Size | : | 12 to 8 AWG, 14 to 8 AWG |
| Voltage Rating | : | 120 VAC |
| Amperage Rating | : | 20 A |
| Interrupt Rating | : | 10 kA |
| Number of Poles | : | 1 |
| Trip Type | : | Thermal/Magnetic |
Specification Sheet
https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Square_D_QO120GFI_Specification_Sheet.pdf
Print