The ProSoft Technology 802.11abg Industrial Hotspot (RLX2-IHW) is an industrial-grade wireless Ethernet radio for applications up to 8 km. The RLX2-IHW has an RF data rate up to 54 Mbps, using the IEEE 802.11b/g (2.4 GHz band) and 802.11a (5 GHz band) standards. The radio features Ultra-Fast access point switchover times of less than 10 ms, which is ideal for applications such as automated storage-retrieval systems, automotive skillet lines, and bottle filling machines. The radio will be appreciated by both sides - OT and IT. Your OT personnel will like the radio's EtherNet/IP embedded object and Modbus agent support, which allows them to get diagnostic data into their PLC immediately, where they can analyze and act upon data, optimizing your resources. IT departments will appreciate the radio's SNMP support.
ProSoft Technology Industrial Hotspot, 10/100/1000 Base-T/RJ45 Connector, 1 to 54 Mbps Data Transfer Rate, 10/24 VDC, <6 W, DIN Rail/Panel Mount, 5.82 in H x 4.64 in W x 1.48 in D
| Dimensions |
: |
5.82 in H x 4.64 in W x 1.48 in D |
| Mounting Type |
: |
DIN Rail/Panel |
| Connector Type |
: |
10/100/1000 Base-T/RJ45 |
| Data Transfer Rate |
: |
1 to 54 Mbps |
| Voltage Rating |
: |
10/24 VDC |
| Power Consumption |
: |
<6 W |
- EtherNet/IP™- or Modbus®-based PLCs/PACs can use message instructions to read diagnostic information from the radios, helping to reduce downtime when troubleshooting wireless network problems
- 802.11i, WPA-2 personal/enterprise using 128-bit AES encryption ensures secure networking
- Radius security ensures secure networking with advanced authentication and encryption
- Virtual local area networks (VLAN) allow for secure network segmentation
- Quality of service (QoS) provides data prioritization for I/O control devices, video data, etc
- Ultra-fast roaming (under 10 ms) maintains seamless, high-speed connections to one or more devices on moving equipment and machines (such as cranes, AGVs and carriers) as they travel between access points
- IGMP snooping and packet filtering optimizes UDP multicast traffic for superior EtherNet/IP I/O communications
- Supports the ability to communicate with multiple ethernet devices when used with existing third-party wireless infrastructures
- Supports power over ethernet (PoE) to reduce cabling costs
- Disaster recovery feature allows the radio configuration to be stored on a microSD card for quick field replacement
- Connect serial networks (Modbus, DNP 3, etc.) over 802.11 wireless networks
- SNMP support
- Simple local and remote configuration, monitoring and wireless network diagnostics
- 2.412 to 2.462 GHz (FCC)/2.412 to 2.472 GHz (ETSI)/5.15 to 5.25 GHz (FCC/ETSI)/5.725 to 5.85 GHz (FCC) frequency band
- 802.11a, 802.11b, 802.11g, 802.11i wireless standards
- 2.4 GHz - up-to 100 mW (20 dBm)/5 GHz - up-to 64 mW (18 dBm) programmable transmitting power
- 802.11b:11, 5.5, 2,1 Mbps (DSSS,BPSK,QPSK,CCK)/802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps (OFDM)/802.11a: 54, 48, 36, 24, 18, 12, 9, 6 Mbps (OFDM) channel data rates
- -90 dBm at 1 Mbps/-85 dBm at 11 Mbps/-82 dBm at 24 Mbps/-75 dBm at 54 Mbps receiver sensitivity
- 1 to 13 (802.11b/g), 36/40/44/48/149/153/157/161/165 (802.11a) channel selection
- WPA2 - 802.11i with 128 bit AES-CCM, legacy WPA TKIP, WEP support, mac ID filter, admin password security
-
Specification Sheet
https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/ProSoft_RLX2_IHW_A_Datasheet.pdf
Non Stock
Print