Electrozad

The 3RU11 thermal overload relays up to 100 A have been designed for inverse time delayed protection of loads with normal starting (see "Function") against excessive temperature rises due to overload or phase failure. An overload or phase failure results in an increase of the motor current beyond the set rated motor current. Via heating elements, this current rise heats up the bimetal strips inside the device which then bend and as a result trigger the auxiliary contacts by means of a tripping mechanism. The auxiliary contacts then switch off the load by means of a contactor. The break time depends on the ratio between the tripping current and current setting Ie and is stored in the form of a long term stable tripping characteristic. The "tripped" status is signaled by means of a switch position indicator. Resetting takes place either manually or automatically after the recovery time has elapsed. The devices are manufactured in accordance with environmental guidelines and contain environmentally friendly and reusable materials. They comply with all important worldwide standards and approvals.

SIRIUS Thermal Overload Relay, 70 to 90 A, 50/60 Hz Frequency, 1000 VAC Coil, 1NC-1NO Contact Form, 3 A at 24/110/120/125 VAC, 2 A at 230 VAC, 1 A at 400 VAC, 1 A at 24 VDC, 0.22 A at 110/125 VDC, 0.11 A at 220 VDC Contact, 3 Pole, Contactor Mounting, Screw Terminal, IP20 Enclosure, -20 to 70 deg C, 120 mm H x 70 mm W x 140 mm D Dimensions

• Manual, automatic and remote reset
• Switch position indicator
• Test function
• Reset button
• Stop button
• 3 A at 24/110/120/125 VAC, 2 A at 230 VAC, 1 A at 400 VAC operating current of auxiliary contacts at AC-15, 1 A at 24 VDC, 0.22 A at 110/125 VDC, 0.11 A at 220 VDC operating current of auxiliary contacts at DC-13

• Catalog https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/SIRIUS_3RB2036_1QB0_Catalog.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/SIRIUS_3RU1146_4LB0_Specification_Sheet.pdf