Electrozad

Our modbus TCP/IP communication gateways offer bidirectional data transfers between devices on dissimilar networks. Our modbus TCP/IP driver uses multiple Clients and servers for faster data throughput. Protocol conversion gateways are the ideal solution for distributed networks when adding a remote rack becomes too costly. The PLX30s are stand-alone DIN rail mounted gateways that provide one EtherNet port for communication, remote configuration and diagnostics and up to four (4) serial communication ports. The PLX30 gateways also come with an SD card slot (SD card optional) for storing configuration files. In the event of a failure the SD card can be transferred to another gateway reducing downtime. These gateways contain a 4000 word database, includes a wide input power range (10 VDC - 36 VDC)and an extended temperature range (-25deg C to 70deg C). The PLX30 gateways include all the necessary cables required for communication.

ProSoft Technology Modbus TCP/IP to Modbus Master/Slave Gateway, EtherNet/IP/PLX30-MBTCP Protocol, 50/60 Hz, Serial Port, 4 Ports, 5.38 in H x 1.99 in W x 4.38 in D, Environmental Conditions: 5 to 95% Humidity

• 10 to 36 VDC allowed positive, negative, GND terminals power supply
• -25 to 70 deg F operating temperature
• Configuration (CFG) and error (ERR) communication status, power (PWR) and hardware fault (FLT), network status (NS) EtherNet/IP class I or class III connection status, module status (MS) module configuration status, EtherNet communication port link/activity and 100mbit, serial communication port receive (RX) and transmit (TX) LED indicators
• The number of serial communication ports depends on the gateway type, and the combination of protocols serial port
• 10/100 base-T half duplex RJ45 connector electrical isolation 1500 Vrms at 50 Hz to 60 Hz for 60 sec EtherNet port
• EtherNet broadcast storm resiliency is equal to less than or equal to 5000 [ARP] frames/sec and less than or equal to 5 min duration
• 10/100 Mb EtherNet port with auto cable crossover detection
• 2500 Vrms port signal isolation per UL 1577, 3000 VDC minimum port to ground and port to logic power isolation serial port isolation