Electrozad

Klippon® connect with clamping-yoke technology the high reliability and variety of designs of the terminal blocks with clamping-yoke connections make planning easer and optimizes operational safety. Klippon® connect provides a proven response to a range of different requirements.

Klippon® Disconnect Terminal Block, Series: W Series, 600 VAC, 20 A, 30 to 12 AWG Wire, 10 mm Wire Strip Length, Test Disconnect Terminal, 0.4 to 0.8 N-m Torque, Snap-On Mounting, Thread Connection, -50 to 120 deg C, Wemid, Orange, 2.362 in H x 0.201 in W x 1.89 in D Dimensions

• Disconnection element, for plug-in cross-connector, one end without connector
• TS 35 mounting rail
• Right open sides
• 0.6 x 3.5 mm blade
• 0.05 to 4 sq-mm minimum/maximum clamping range, rated connection
• On side connection direction
• One torque level with DMS electric screwdriver
• A3 gauge to IEC 60947-1
• M2.5 clamping screw
• 0.5 to 2.5 sq-mm minimum/maximum rated connection wire connection cross-section, finely stranded with wire to end ferrules DIN 46228/1
• 0.5 to 4 sq-mm minimum/maximum rated connection wire connection cross-section, solid core
• 1.5 to 4 sq-mm minimum/maximum rated connection wire connection cross-section, stranded
• Pivoting slitting
• 1.33 mOhm volume-resistance according to IEC 60947-7-x
• 6 kV rated impulse withstand voltage
• 3 pollution severity
• 0.5 to 1.5 sq-mm minimum/maximum wire connection cross-section, finely stranded with wire to end ferrules DIN 46228/1, 2 clampable wires
• 2.5 sq-mm screw connection
• UL 94 flammability rating V-0
• WTR 2.5 OR type