Electrozad

The photo control shall be a locking-type control with a solid state photo sensor and a bimetal thermal switch. Switch operation shall have a rating of 1000 W tungsten and 1800 VA ballast at 105 to 305 VAC. The photo control must be designed with integral housing and lens. The photo control shall be equipped with standard 3-prong twist and lock type plug connection. Plug connection terminals shall be solid brass. The photo control shall be 100% factory tested and function within specified light levels. The photo control shall be agency certified and tested accordingly. The photo control shall comply with ANSI standards C136-10. The photo control shall be Intermatic model LC2100.

Intermatic® Locking Thermal Photocontrol, Low Cost Multi-Voltage, 120 to 277 VAC, 50/60 Hz Frequency, 1000 W Tungsten, 1800 VA Ballast, Silicone Sensor, 1 fc ON, 6 fc OFF Sensitivity, Environmental Conditions: -40 to 158 deg F Operating Temperature, 3650 Cycles Operating Cycles, Twist-Lock Mounting, Polycarbonate, Blue, 3.15 in Dia x 2.6 in H Dimensions

• This model combines a silicon diode photo sensing element with thermal switch to provide a multi-voltage, cost-effective photo control
• Mechanical bimetal switch with silicon diode photocell
• Multi-voltage covers 120 to 277 VAC applications
• Non-drifting silicon light sensor IR filtered for human eye response
• Bi-metal, thermal switch mechanism
• Delay turn off reaction prevents switching off from temporary light sources, such as car headlights
• Thermal switch with solid state photo sensor, multi-voltage twistlock photocell

• Instruction/Installation Manual https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Intermatic_LC2100_Instruction_Sheet.pdf