Electrozad

Banner Engineering Mani-Beam® Photoelectric Sensor, Self-Contained, Series: 312, Rectangle Shape, Diffuse Sensing Method, 380 mm Sensing, Infrared Sensing Beam, 8 ms Response, Switch Output, 24 to 240 VAC, 50/60 Hz Frequency, Quick-Disconnect Connection, LED Light Source, 84.8 mm L x 12 mm W x 33.3 mm H Size, NEMA 1/2/3/3S/4/4X/12/13/IP67 Enclosure, -20 to 70 deg C Operating, M18 Mounting, Environmental Conditions: 90% at 50 deg C

• Protected against transient voltages, false pulse on power-up
• Controls are located on the rear panel of the sensor and are protected by a gasketed, clear acrylic cover
• Totally encapsulated, O-ring sealing, stainless steel screws construction
• Overload conditions can destroy ac MINI-BEAM sensors, directly wiring sensor without load series, across hot and neutral will damage sensor (except emitter models)
• Low-voltage use requires careful analysis of the load to determine if the sensors leakage current or on-state voltage will interfere with proper operation of the load
• The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts
• Controls are located on rear panel of sensor and protected by a gasketed, clear acrylic cover
• Less than or equal to 5 V at 300 mA load and less than or equal to 10 V at 15 mA load on-state voltage drop
• Self-contained diffuse mode photoelectric sensor
• Less than 1.7 mA off-state output leakage
• Light/dark operate

• Full Engineering Drawing https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Banner_Engineering_MIAD9DQ_Full_Engineering_Drawing.pdf