Electrozad

EOSW-100 series RF wall switches work with EOPC-100 wireless occupancy sensors and optional EORS-100 and EOHR-100 remote switches, to turn lights ON and OFF based on occupancy. Models are available to control one or two switched legs in applications with or without neutral wires at the switch box. Both single and dual relay RF wall switches fit in single gang junction boxes for direct control of one or two loads. Each wall switch can be paired with one or more EOPC-100 wireless sensors for occupancy based control. By default, single relay wall switches operate in manual ON/automatic OFF mode. Dual relay switches are factory set for auto ON to 50%, relay 1 is automatic ON/OFF and relay 2 is manual ON/automatic OFF. When occupancy is no longer detected and the time delay elapses, lights automatically turn OFF. These sequences of operation and other default settings, may be changed using hidden configuration buttons.

WattStopper® RF Wall Switch, 2-Relay, Series: EOSW-100, 902 MHz Frequency, 120/277 VAC Control, 5/15/30 min Switching, Surface Mounting, 32 to 104 deg F Operating, Environmental Conditions: 5 to 95% Non-Condensing Relative Humidity, 4.15 in H x 1.75 in W x 1.31 in D Dimensions

• May be bound with remote RF sensors and switches
• Replace standard wall switches for energy code compliance without the need for rewiring
• Receiver for wireless communication with RF occupancy sensors and remote switches
• Default settings for most energy efficient operating mode out of the box
• RF wall switches work with EOPC-100 wireless occupancy sensors
• Zero crossing for long relay life
• Choice of manual ON or automatic ON operation
• Selectable time delay
• Test mode allows quick and easy setup
• Compatible with decorator wall plates
• Loads can be assigned to either button
• Without neutra

• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_f6ccec3167d3436d3451f46e111ab6a884dc14d2c9bb4742a268914dd66a64b8.pdf