Electrozad

UNITRONIC® FD CP (TP) plus is a Type CMX approved multi-pair communication cable designed for continuous flexing industrial signal and data applications. The tear-resistant polyurethane jacket provides excellent service life in harsh environments against most oils, solvents, coolants. It has a tinned copper braid shield for EMI resistance.

UNITRONIC® Signal and Control Cable, Shielded, Series: FD CP Plus, Drum Packaging, 250 VAC, 2 Conductors, Bare Copper Conductor, 22 AWG Conductor, 0.28 in OD, >5 GOhm Resistance, Polyolefin Insulation, Polyurethane Jacket, Gray Jacket, -40 to 80 deg C

• Conductors are paired and twisted together, non-woven wrapping
• Resistant to oils, solvents, and coolants
• Abrasion-resistant and halogen-free jacket
• Resistant to microbes and hydrolysis
• Approximately 0.65 mH/km inductance
• Halogen-free, has low capacitance and is flexible down to -40 deg C
• PUR outer sheath, tear and notch-resistant, resistant to mineral oils and abrasion when used in power chains
• Low-adhesive surface, resistant to hydrolysis and microbes, oil-resistant
• IEC 60332-1-2, VW-1 acc. UL 1581, FT2 (horizontal flame test) flame retardance ratings
• Designed for 10 million alternating bending cycles and horizontal travel distances up to 100 meter
• Wide temperature range for applications in harsh climatic environments
• Decoupling of circuits by means of twisted-pair (TP) design (crosstalk effects)
• Suitable for use in measuring, control and regulating circuits
• Linear robots, automated handling equipment
• Drag chain use in case of horizontal installation travel distances up to 100 m, no use inside drag chains in the USA since the UL AWM Style 21576 does not allow for external wiring/ interconnection

• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/UNITRONIC_0030928_Data_Sheet.pdf