Electrozad

The JSR series are used for expanding the outputs of safety relays. Stop signals can be delayed and outputs are also provided for function indication.

ABB Safety Relay, Expansion, Series: JSR1T, 6 A, 1.2 W Power, 24 VDC Coil, 1NC-4NO Contact Form, DIN Rail Mounting, Screw Terminal, LED Display, IP20/IP40 Enclosure, -10 to 55 deg C, 74 mm H x 45 mm W x 120 mm D Dimensions

• The JSR1T has twin stop functions, that is, two relays with mechanically operated contacts
• A monitored stop function is achieved by connecting the test output (terminals X1 and X2) to the test or reset input on the safety relay which is being expanded
• One condition for a safe delayed stop is that the delay time cannot increase in the event of a fault
• LED indication of output
• Single and dual channel
• Quick release connector blocks
• Ag + Au flash contact material
• 5 A gL/gG fuses output
• 6 A gG conditional short circuit current
• 2.5 kV impulse withstand voltage
• 150 ohm maximum input wire resistance at nominal voltage
• 0 sec timing delay
• Meets safety category 4

• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_c42fb50c9cbb14daf33124e5ebcea783518bdf9231451fe7d74f420fba594b6d.pdf