Electrozad

The Zamac Hammer-Screw is a unique, one-step nail drive anchor featuring a Phillips type head and a screw thread for use in concrete, block, brick or stone. It is available in 1/4 in diameter and lengths ranging from 3/4 to 3 in. With a body formed from corrosion resistant Zamac alloy and a zinc plated carbon steel or Perma-Seal coated drive screw, this anchor has been developed as an improvement over standard nail in anchors. The Zamac Hammer-Screw has been designed to provide a removable anchor with higher tension load capacities compared with traditional nail in when installed in concrete. The anchor is not recommended for overhead, life-safety or sustained tensile loading applications unless special considerations are given to the allowable loads.

DeWALT® Nail Drive Anchor, Series: Hammer-Screw™, 1/4 in Dia, 1-1/2 in Overall Length, Mushroom Head, Carbon Steel/Stainless Steel/Zamak Alloy, Zinc Plated, 1/4 in Drill, 5/16 in Hole Dia, 5/8 in Minimum Embedment Depth, 35/64 x 9/64 Head, 650 lb at 2000 psi for Normal Weight Concrete Shear Strength, 675 lb at 2000 psi for Normal Weight Concrete Tensile

• Installs in a variety of base materials
• Removable anchor when screw is backed out with a Phillips head driver
• 880 lb at 4000 psi and 6000 psi for normal weight concrete
• 850 lb at 4000 psi, 890 lb at 6000 psi for normal weight concrete