Electrozad

The Raychem RTD10 and RTD20 are three-wire platinum RTDs (resistance temperature detectors) typically used with control and monitoring systems when accurate temperature control is required. These RTDs are designed to withstand highly corrosive applications. The Alloy 825 sheathed lead wire is rugged yet flexible, allowing the sensor to get around obstructions or into areas where a rigid conduit is not practical.

Raychem® RTD Temperature Sensor, Series: RTD, -76 to 1100 deg F, +/-1 deg F Accuracy, 100 Ohm, -20 to 60 deg C

• Typically used in non-hazardous and CID2 locations
• 304 stainless steel housing
• Alloy 825 stainless steel 3/16 in diameter outer sheath
• 1100 deg F maximum exposure temperature
• 1/2 in NPT, 303 MX stainless steel conduit connector
• 24 in length and 16 AWG stranded tinned copper pigtail wire
• 1/4 in diameter and 3 in length sensor

• Instruction/Installation Manual https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Raychem_AT_180_Manual.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Raychem_RTD10_Specification_Sheet.pdf
• Warranty Information https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Raychem_PS_03_Warranty.pdf