Non Stock
printPrint
  1. pin-int

Carlo Gavazzi RGC1A60D25KGU

Carlo Gavazzi RGC1A60D25KGU 1-Phase Solid State Relay, 25 A, SPST/NO Contact, 600 VAC V Coil

  • MPN: RGC1A60D25KGU
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
Carlo Gavazzi RGC1A60D25KGU

Carlo Gavazzi Solid State Relay, 1-Phase, Series: RGC, 25 A, 45 to 65 Hz, 600 VAC Coil, SPST/NO, 1 Pole, Panel Mount, Screw Terminal, IP20, -40 to 80 deg C, 110 mm H x 17.8 mm W x 98.5 mm D

Dimensions      :      110 mm H x 17.8 mm W x 98.5 mm D
Enclosure Type      :      IP20
Frequency Rating      :      45 to 65 Hz
Mounting Type      :      Panel
Number of Poles      :      1
Series      :      RGC
Temperature Rating      :      -40 to 80 deg C
Terminal Type      :      Screw
Type      :      1-Phase
Amperage Rating      :      25 A
Contact Form      :      SPST/NO
Coil Voltage      :      600 VAC
  • Product width ranging from 17.5 mm up to 70 mm
  • Up to 600 VAC rated Operational voltage
  • Up to 85 A AC at 40 deg C rated operational current
  • Up to 18000A2s for I2t and 1200 Vp blocking voltage
  • 3 to 32 VDC, 20 to 275 VAC (24 to 190 VDC) control voltages
  • Integrated voltage transient protection with varistor
  • 100 kA short circuit current rating
  • 230 V 10 to 15 percent, 800 Vp rated blocking voltage
  • 4 to 32 VDC control voltage
  • 25AAC, 1800A2s rated current at 40 deg C2
  • ZC switching mode
  • 625 V internal varistor
  • 20V latching voltage, > 0.5 at Vrated power factor, continuously ON Green LED, when control input is applied, 2 deg pollution, III over voltage category, 4000 Vrms isolation between input to output, 4000 Vrms input and output to case
  • 30 number of motor starts (x:6, Tx:6s, F:50 percent ) at 40 deg C 5
  • 250 mA at AC min operational current, 51 A at AC rep overload current - (motor rating) PF = 0.4 - 0.5 UL508: TAMB=40 deg C, tON=1s, tOFF=9s, 50cycles, 600 Ap maximum transient surge current (ITSM), t=10ms, 3 mA at AC maximum off-state leakage current at rated voltage, 1800 A2s I2t for fusing (t=10ms) minimum, 1000 V/us Critical dv/dt ( at Tj init = 40 deg C)
  • 3.8 VDC pickup voltage, 1 VDC drop out voltage, 32 VDC maximum reverse voltage, 0.5 cycle + 500us at 24VDC response time pick-up ZC, 0.5 cycle + 500us at 24VDC response time drop out
  • 1.5 kW at 600 VAC motor ratings
  • -40 to 100 deg C storage temperature
  • 95 percent non-condensing at 40 deg C relative humidity
  • SSR connection configuration