Electrozad

The ProLinx EtherNet/IP to PROFIBUS DPV1 master gateway creates a powerful connection between devices on an EtherNet/IP network and a PROFIBUS slave device. This stand-alone DIN rail mounted protocol gateway provides one EtherNet port and PROFIBUS DP master configurable DB9F port. The EtherNet/IP protocol driver supports the explicit messaging implementation of the protocol. User configurable as both a client and a server, the EtherNet/IP port is a very powerful data transfer tool. The PROFIBUS DP master protocol driver supports complete master specifications according to IEC 61158 on either a Mono-Master or Multi-Master network. The module supports the DPV1 specification.

ProSoft Technology Master Gateway, EtherNet/IP/PDPM Protocol, 50/60 Hz, RS232/422/485 Interface Type, 9.6 kbps to 12 Mbps Data Transfer Rate, Serial Port, 2 Ports, 5.2 in H x 2.07 in W x 4.52 in D, Environmental Conditions: 5 to 95% Humidity

• 18 to 32 VDC allowed positive, negative, GND terminals 2.5 mm screwdriver blade power supply
• -4 to 122 deg F operating temperature
• Power and module status, application status, serial port activity, serial port error status LED indicators
• DB-9M RS-232 only no hardware handshaking configuration serial port
• 10 base-T half duplex RJ45 connector link and activity LED indicators electrical isolation 1500 Vrms at 50 Hz to 60 Hz for 60 sec EtherNet port
• EtherNet broadcast storm resiliency is equal to less than or equal to 5000 [ARP] frames/sec and less than or equal to 5 min duration
• Modbus plus connector two DB9 female standard modbus plus connectors are application ports
• 2500 Vrms port signal isolation per UL 1577, 3000 VDC minimum port to ground and port to logic power isolation serial port isolation
• 500 mA maximum at 32 VDC power supply