Electrozad

SIMATIC Base Unit, Type A0, 18 Terminals, Push-In Wire Clamp Type, For Use With: SIMATIC ET 200SP Distributed I/O System, 117 mm H x 15 mm W x 35 mm D

• No tools needed for one-handed wiring using push-in terminals
• Actuation of the spring NC contacts with a standard screwdriver, with a blade width up to 3.5 mm
• Outstanding access due to arrangement of measuring tap, spring NC contacts and cable entry in columns, while at the same time reducing the space required by 64%
• Faultproof color coding of the spring NC contacts for better orientation in the terminal panel
• Replacement of I/O modules during operation without affecting the wiring
• Operation with module gaps
• Automatic coding of the I/O modules prevents destruction of the electronics if a module is accidentally inserted in the wrong slot during replacement
• Self-assembling shielded backplane bus
• Multi-layer conductor plate with shield levels for interference-free signal transmission from the terminal to the I/O module
• System integrated, space-saving shield connection for quick installation
• Self-assembling potential groups without external wiring or jumpers
• Replaceable terminal box
• Side by side latching of the bus for high mechanical and EMC loads
• Bridged to the left
• Without auxiliary terminal

• Instruction/Installation Manual https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/SIMATIC_6ES7193_6BN00_0NE0_Manual.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/SIMATIC_6ES7193_6BP00_0BA0_Specification_Sheet.pdf