Electrozad

Philips Advance HID ballasts are available to operate the wide variety of metal halide, high pressure sodium and low pressure sodium lamps available in today's marketplace. Like fluorescent, HID lamps are gas discharge lamps. Light is produced by an arc discharge between two electrodes located at opposite ends of an arc tube within the lamp's outer glass envelope. The ballast is the lamp's power supply; its purpose is to provide proper starting and operating voltage and current to initiate and sustain this arc. Philips furnishes 120/208/240/277 Philips Advance Quadri-Volt core and coil ballasts to allow the stocking distributor to conveniently meet the replacement and retrofit needs of customers. In addition, we now offer 120/208/240/277/480 VAC 5-TAP core and coil ballasts for the most popular applications. 5-TAP ballasts add the 480 VAC input lead to the Quadri-Volt designs. A Quadri-Volt or 5-TAP core and coil, along with the appropriate capacitor, igniter (where required), mounting bracket and hardware and installation instructions are packed in a space saving shipping carton. These "kits" eliminate the need for distributors or end users to stock loose components of single voltage ballasts for 120, 208, 240, 277 and even some 480 VAC applications, though single voltage kits for 480 VAC applications will also be available.

Advance HID Ballast, Magnetic Core and Coil/CWA, HID Metal Halide Lamp, 175 W Lamp, 213 W Wattage, 120/277/347 VAC, 0.62/0.8/1.8 A, 60 Hz Frequency, Probe Start, -20 deg F Minimum Starting, Power Factor: 0.9, No Dimmable, 1 Lamp, Thermal Protection: Class P, Ballast Factor: 1, ANSI M57/107 Ballast Grade, 4 in L x 4.02 in W x 2.9 in H Dimensions

• Constant lamp wattage for optimal color control and maximum performance
• Significant energy savings can be achieved when compared to incandescent or magnetic alternatives
• IntelliVolt® operates on either 120 or 277 VAC or any voltage in between 50/60 Hz
• Smaller and lighter weight than magnetic HID F-can ballasts
• Compact footprints provides greater design flexibility
• Reduced input watts compared to magnetic systems, energy savings, lower cost of ownership
• Low frequency lamp operation prevents acoustic resonance in the lamp arc tube
• Square wave output waveform helps maximize lamp life
• Lamp EOL detection shuts down system at lamp end of life, enhanced safeguard
• Thermally protected, internally fused and output short circuit protected
• Lamp wattage will change less than 0.5% with a +/-10% change in-line voltage
• Metallic enclosure provides enhanced capability for high ambient temperatures by transferring heat away from sensitive internal components
• Bottom leads with studs
• Integral 120 VAC output to supply power to a four-wire self heating thermal protector (39 W, 70 W, 100 W)

• Catalog https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Philips_Advance_HDF154T535M_Catalog.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Philips_Advance_191866_Datasheet.pdf