Weidmuller Timing Relay, Pull-In Delay, Series: BT Series, 250 VAC, 5 A, 1 Pole, SPDT, 50 ms Pulse, LED, -10 to 55 deg C, DIN Rail Mount, 3.15 in H x 0.689 in W x 2.913 in D
| Amperage Rating |
: |
5 A |
| Dimensions |
: |
3.15 in H x 0.689 in W x 2.913 in D |
| Display Type |
: |
LED |
| Mounting Type |
: |
DIN Rail |
| Pulse Duration |
: |
50 ms |
| Series |
: |
BT Series |
| Temperature Rating |
: |
-10 to 55 deg C |
| Type |
: |
Pull-In Delay |
| Voltage Rating |
: |
250 VAC |
| Contact Form |
: |
SPDT |
| Number of Poles |
: |
1 |
- The BTR installation relay is a timing relay with an adjustable pickup delay
- After connecting the power supply, the set time T begins
- The timing relay is built into an insta enclosure just 17.5 mm wide
- The relay contact is designed as a changeover contact with 250 VAC/5 A switching capacity
- 1 CO contact (AgNi 90/10)
- 10^5 switching cycles (5A at 250 VAC, Ohm load at 1800/h)
- 100 MOhm minimum at 500 VDC contact-resistance
- 10^7 switching cycles (no load, 1800/hr) mechanical service life
- Screw connection
- <=0.4 VA, 1.6 W power rating
- 20.4 VAC/2.4 VAC/VDC pull-in/drop-out voltage, typical
- 0.1 s to 120 hr time range
- 100 ms maximum reset time after voltage interruption
- 2500 VA AC switching capacity (resistive) maximum, 120 W at 24 VDC switching capacity (resistive) maximum
- UL 94 flammability rating V-2, PH1 blade, 2 kVeff/1 min dielectric strength input - output
- IP20 protection degree, 7 mm stripping length, rated connection
- 0.98 Nm tightening torque
- 2.5 to 0.5 sq-mm clamping range, rated connection, 14 to 20 AWG wire connection cross-section, 2.5 to 0.5 sq-mm wire cross-section, solid, 2.5 to 0.5 sq-mm wire connection cross-section, finely stranded
- 250 VAC rated switching voltage, 24 to 230 VAC, 24 to 48 VDC rated control voltage
- -25 to 65 deg C storage temperature, TIMER BTR-S type
-
Specification Sheet
https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Weidmuller_8647720000_Datasheet.pdf
Non Stock
Print