Lutron® Maestro® 0-10 V Dimmer Sensors are lighting controls with passive infrared sensors that automatically control the lights in an area. These sensors detect heat from occupants moving within an area to determine when the space is occupied. The Maestro® 0-10 V Dimmer Sensor combines a Maestro® 0-10 V Dimmer with an occupancy or vacancy Sensor.
Maestro® Dimmer Sensor Switch, Multi-Location, Series: MS-Z101, 120 to 277 VAC, 50 mA, Fluorescent/LED Lamp, 50/60 Hz Response, NEMA 4/10 Enclosure, Wall Mounting, 0 to 40 deg C, Plastic/Steel, White, 2.94 in W x 0.3 in D x 4.69 in H Dimensions
| Control |
: |
Tap |
| Dimensions |
: |
2.94 in W x 0.3 in D x 4.69 in H |
| Enclosure Type |
: |
NEMA 4/10 |
| Frequency Rating |
: |
50/60 Hz |
| Lamp Type |
: |
Fluorescent/LED |
| Material |
: |
Plastic/Steel |
| Mounting Type |
: |
Wall |
| Series |
: |
MS-Z101 |
| Start Type |
: |
Pre-Set |
| Temperature Rating |
: |
0 to 40 deg C |
| Type |
: |
Multi-Location |
| Voltage Rating |
: |
120 to 277 VAC |
| Amperage Rating |
: |
50 mA |
| Number of Poles |
: |
1 |
| Operation Mode |
: |
On/Off |
| Color |
: |
White |
- Controls 0-10 V electronic fluorescent ballasts or LED driver load types
- Passive infrared motion detection with exclusive Lutron® XCT Technology for fine motion detection
- 180 deg sensor field-of-view, up to 30 ft x 30 ft (9 m x 9 m) [900 ft2 (81 m2)] major motion coverage and 20 ft x 20 ft (6 m x 6 m) [400 ft2 (36 m2)] minor motion coverage
- Occupancy version can be set to auto-on/auto-off or manual on/auto-off
- Adjustable timeout (1, 5, 15, or 30 minutes)
- Adjustable settings for auto-on light level (occupied level) 100%, 50%, last light level, or locked preset light level
- Adjustable sensitivity level High, Med, Low, Min
- Off warning fades lights to off over a period of 10 seconds
- Advanced Maestro® dimmer features available (locked preset, fade-to-on, and fade-to-off, etc)
- Adaptive switching algorithm for extended relay life
- Smart ambient light detection (ALD)
- Works with a single standard mechanical 3 way switch or up to 9 companion switches (MA-AS or MSC-AS)
- High-end trim and low end trim to adjust maximum and minimum light levels
- Controls up to 25 ballasts or drivers (IEC 60929 Annex E.2 requires the ballast/driver to limit the current draw to 2.0 mA maximum)
- Selectable dimming curve- linear or square law
- Miswire and incompatible load alert
- On a single-tap, lights fade ON or OFF, on a double-tap, lights go to full ON
- Light levels can be fine-tuned by pressing and holding the dimming rocker until the desired light level is reached
Stock
Print