Weidmuller Solid State Relay, Series: TERM, 10 mA/2 A, 240 mW Power, 300 Hz Frequency, DIN Rail Mounting, Tension Clamp Terminal, -20 to 60 deg C, 3.563 in H x 0.252 in W x 3.457 in D Dimensions
| Dimensions |
: |
3.563 in H x 0.252 in W x 3.457 in D |
| Frequency Rating |
: |
300 Hz |
| Mounting Type |
: |
DIN Rail |
| Power Rating |
: |
240 mW |
| Series |
: |
TERM |
| Temperature Rating |
: |
-20 to 60 deg C |
| Terminal Type |
: |
Tension Clamp |
| Amperage Rating |
: |
10 mA/2 A |
- 24 VDC +/- 20% control voltage rating, 4439 Yr MTTF
- 13.6 VAC/12.8 VDC cut-in/drop-out voltage
- Green LED status indicator, free-wheel diode, reverse polarity protection protective circuit, 24 VDC coil voltage of the replacement relay
- 3 to 33 VDC rated switching voltage, 6.1 mA/5.5 mA DC inrush/breaking current, 2 A rated switching current, 15 A/10 ms inrush current
- 10 mA DC +/-20% nominal control current, 2 A continuous current
- <60 us switch-on delay,<600 us switch-off delay, <=120 mV voltage drop at maximum load, <10 uA leakage current, free-wheel diode protective circuit, load side
- UL 94 flammability rating V-0, 1 NO contact (MOS-FET)
- 300 VAC rated voltage, >=5.5 mm creepage and clearance distance for control side - load side, 2.5 kVeff dielectric strength for control side load side, 4 kVeff/1 min dielectric strength to mounting rail, 6 kV (1.2/50 us) impulse withstand voltage
- IP20 protection degree, 2 pollution severity, III surge voltage category
- 8 mm stripping length, rated connection
- 0.6 x 3.5 mm blade
- A1, B1 gauge to IEC 60947-1
- Rigid copper conductor, flexible copper conductor
- -40 to 70 deg C storage temperature
- 300 Hz maximum switching frequency (DC control voltage)
- TOZ 24VDC 24VDC2A type
- 0.4 Nm tightening torque
- 2.5 to 0.14 sq-mm clamping range, rated connection
- 14 to 26 AWG wire connection cross-section, 2.5 to 0.14 sq-mm solid wire cross-section
- 2.5 to 0.14 sq-mm wire connection cross-section, finely stranded
Non Stock
Print