Electrozad

The picoPak™ I-I is a very compact isolator for 4 to 20 mA loops. The output is loop powered. The module is perfect for eliminating ground loops and providing increased protection for PLC and DCS analog inputs. Isolation is optical. This means the output load does not effect the voltage drop across the input (the voltage drop is a near constant at 3.5 V).

Weidmuller picoPak™ Isolator, Series: I-I, DC Current/Voltage Input, DC Current Output, 4 to 20 mA Input Current, 4 to 20 mA Output, DIN Rail Mount, 0 to 50 deg C, 5 ms Response, 0.1% Typical at 25 deg C/0.8% Over Temperature Range Accuracy, 88.4 mm L x 9.5 mm W x 78.5 mm H

• Mounts on 32 mm and 35 mm DIN rails
• 2000 V isolation
• User adjustable span and zero adjustments
• Variable impedance, <3.5VDC over input range
• 50 mA maximum ratings
• 0 to 500 Ohm output load
• Burnout level - 3.6 mA for input open, 24 mA max for overcurrent input
• Zero and span adjustment - 15% nominal around 4 mA for calibration purposes
• Supply - DC voltage in output loop (2-wire)
• Supply range - 18 to 30 VDC, 24 VDC nominal
• 25 mA maximum consumption
• -20 to 70 deg C storage
• DK6 housing
• 22 to 12 AWG conductor wire range
• 0.4 Nm tightening torque
• 7 mm long insulation stripping

• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Weidmuller_9908800000_Datasheet.pdf