Crouse-Hinds series EBMB hinged cover motor control enclosures are used in damp, wet, dirty, dusty hazardous locations without the need for a protective shelter. EBMBs provide line disconnect means and short circuit protection. Used for service entrance, feeder or branch circuit protection for lighting, heating, appliance and motor circuits.
Crouse-Hinds Explosionproof Circuit Breaker, Dust-Ignitionproof Raintight, Series: EBMBA, 480 VAC, 250 VDC, 20 A, 18 kA Interrupt, EHD Frame, 3 Pole, 14.78 in W x 10.25 in D x 19.4 in H Dimensions, Copper-Free Aluminum
| Dimensions |
: |
14.78 in W x 10.25 in D x 19.4 in H |
| Frame |
: |
EHD |
| Material |
: |
Copper-Free Aluminum |
| Series |
: |
EBMBA |
| Trip Range |
: |
20 A |
| Type |
: |
Dust-Ignitionproof Raintight |
| Voltage Rating |
: |
480 VAC, 250 VDC |
| Amperage Rating |
: |
20 A |
| Interrupt Rating |
: |
18 kA |
| Number of Poles |
: |
3 |
- Rugged, corrosion-resistant
- Circuit breaker operating handle located through the right side wall of the body permits visual confirmation of correct component assembly and operation
- Total compliance to the wiring end room requirements of the NEC
- Semi-clamshell enclosure design, with an external flanged ground joint between body and cover makes interior components more accessible
- Minimum enclosure to enclosure spacing with little interference between the opened cover and an adjacent enclosure
- Copper-free aluminum hinges allow the cover to swing well out of the way
- Stainless steel, quick release, captive, hex head cover bolts
- Stainless steel springs provide clear indication cover bolts are fully retracted from body
- Versatile, internal operating mechanisms allow for field adjustment to accommodate popular manufacturers breakers
- Simple, straight forward installation of breaker on pre-drilled mounting plate within enclosure, mounting plate also field removable
- Circuit breaker external operating handle can be padlocked in either ON or OFF positions
- Neoprene cover gasket permanently attached to the cover seals out moisture
- Bodies have top and bottom drilled and tapped entrances for power conduits and control conduits
- Removable reducers are supplied, as standard, to accommodate smaller size conduits, all conduit entrances are plugged
- Tap-on mounting feet
- 18 kA at 240 VAC interrupt rating
-
Catalog
https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_e8a22fe82752dacb1cf325a35a0090317420b3d2511ae3a310c8a8d9154807f5.pdf
-
Catalog
https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_fb8ad342feacf863fce43dad4f4d19f1a1a44cd47f5b6a9a262d9ae3a60506f5.pdf
-
Specification Sheet
https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_ecec1b2895f7bb1d84002f88bdc1d03fb1e6a030e9627f5d112259bad26196c2.pdf
-
Warranty Information
https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_e2591020677e3f4a06dfa44770294e5b59dc7819413ebeaa1bdb1ce89a7cea8b.pdf