Electrozad

The LS-102 daylighting controller is a single zone, on/OFF switching device designed to be installed in a closed loop application. A self-contained 24 VDC device with an extended range of 1 to 1400 fc, the LS-102 requires a low voltage power pack to operate. The controller consists of an advanced digital multi-band photosensor, an on-board microcontroller and an LCD display. This photosensor is positioned behind a 100 deg cone that cuts off unwanted light, preventing false triggers.

WattStopper® Switching Photosensor, Automatic Closed Loop, 12/24 VAC/VDC, 7 mA, Daylight Sensor, Environmental Conditions: 35 deg F Operating Temperature, 95% Non-Condensing Relative Humidity, 1 x 108 Operating Cycles, Fixture/Panel Mount, Plastic, 2.4 in Dia x 0.7 in D

• Single zone, on/OFF switching photo sensor
• Automatic setpoint selection
• Easy to read LCD display and LED status indicators
• Automatic startup/calibration
• Digital multi-band photo sensor
• Multiple user adjustable control parameters
• Test mode overrides programmed time delay, enabling installer to verify accuracy of settings
• Control load status verification allows testing and confirmation that wiring is correct
• Form factor designed to eliminate misalignment
• 1 hr manual override capability (when wired with low voltage, pushbutton wall switch)
• Multi-function green LED status indicator
• Programmable in most daylight conditions
• 1 to 1400 fc digital multi-band photo sensor
• 1 to 850 fc on setpoint range

• Specification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_1b892749fc16888da309d461e7e14a926b97aaed5c0bf772d85292c6ff30b1a3.pdf