Electrozad

Leviton® PE300 power extender allows a dimming zone's power handling capacity to be extended to full control of a 20 A circuit. The PE300 will drive 0 to 10 VDC dimmable fluorescent ballasts such as advance Mark VII 0-10V, OSRAM Sylvania Quicktronic Helios or equivalent ballasts.

Leviton® Power Extender, 108/305 VAC, 60 Hz Frequency, 4 in Width, 4.3 in Depth, 3.6 in Height, Metallic Silver

• Works with low voltage non-dimmable and dimmable electronic ballasts, such as advance Mark VII 0-10V, OSRAM Sylvania Quicktronic Helios or equivalent ballasts
• Low end trim available for setting the minimum brightness level
• The PE300 will emulate the characteristics of the dimmer that it is connected to in terms of dimming range and resolution
• Works with any Dimensions® multi-zone controller to extend load capacity on any zone
• 0 to 10 VAC maximum sink load 200 mA (~100 ballasts)

• Instruction/Installation Manual https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Leviton_PE300_D0W_Installation.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_cba1b532f2257b010783ef7187b13ff61c394be6c4e28b7cb50cbde22d51baef.pdf
• Technical Bulletin https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Leviton_ODC0P_S0W_Technical_Bulletin.pdf