Electrozad

3M™ 5300 Series motor lead pigtail splice kit is perfect to use with copper compression lugs. This shielded and non-shielded splice kit is suitable for splicing motor lead cables to the incoming feeder cables. This kit is rated for 5/8 kV rated applications.

3M™ Motor Lead Pigtail Splice Kit, Series: 5300, 5/8 kVAC, Tape Shield/Unshielded/Wire Shield Cable, 4/0 AWG to 500 kcmil Conductor, 0.75 to 1.12 in OD Insulation, 10-1/2 to 11-1/2 in Splice Length, Pigtail Connector, 90 to 130 deg C, EPDM, Black, 11-1/2 in L Dimensions

• Fast and simple installation
• No torches or heat source required
• No special tools required to install splice
• THK walls to resist puncture and abrasion damage
• High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
• Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 VAC and less cables sized 16 AWG to 500 kcmil
• Suitable for use with 30000 Series copper compression lugs or other UL listed copper lugs
• 365 V mil dielectric strength
• 750% elongation
• 1400 psi tensile strength
• 1-1/2 in maximum bolt length
• Polyethylene cable
• 4/0 AWG to 500 kcmil conductor

• Instruction/Installation Manual https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_0123cba4ec9df374c3bc4975106f9ddf82a4b0bc6bff6fdc3cc515b36ff81d81.pdf
• Line Drawing https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_dfd79800ae6ad1e2065d718daed91d06bd0bae99754de82e6ce0796bf1ab6272.pdf
• SDS https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_22d16644d6005ada9977802e7a54ead1299f6f4aef5f80471664dd393790e49f.pdf
• SDS https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_f3cda804726e412010330cffae187bbf86b888e4018e0ace05d4c44a37573c7b.pdf
• Specification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_75b5d7bbb1e5a096f923d6215e9c618a2db5ec7de2c65bde4c87b1e57aed3eeb.pdf