Electrozad

Digital output modules are available in the following variants: 4 DO, 8 DO with 2- and 3-wire technology, 16 DO with or without PLC interface connection. They are mainly used for the incorporation of decentralized actuators. All outputs are designed for DC-13 actuators acc. to DINEN60947-5-1 and IEC 61131-2 specifications. As with the digital input modules, frequencies of up to 1 kHz are possible. Protection of the outputs ensures maximum system safety. This consists of an automatic restart following a short-circuit. Clearly visible LEDs signal the status of the entire module as well as the status of individual channels. In addition to the standard applications of the digital output modules, the range also includes special variants such as the 4RO-SSR module for rapidly switching applications. Fitted with solid state technology, 0.5 A is available here to each output. Furthermore, there is also the 4RO-CO relay module for power-intensive applications. It equipped with four CO contacts, optimized for a switching voltage of 255 V UC and designed for a switching current of 5 A.

Weidmuller Remote Input-Output Module, 16 Output, 24 VDC, 8 mA, -20 to 60 deg C, 76 mm L x 11.5 mm W x 120 mm H

• Single conductor actuator connection
• Feedback-free digital outputs
• Push-in type connection
• 10% to 95% air humidity, noncondensing as per DIN EN 61131-2

• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Weidmuller_1315250000_Datasheet.pdf