Electrozad

AF26 contactors are used for controlling power circuits up to 690 VAC and 220 VDC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF contactors include an electronic coil interface accepting a wide control voltage Uc min to Uc max. Only four coils cover control voltages between 24 to 500 VAC 50/60 Hz or 20 to 500 VDC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF series 1-stack 3-pole contactors are of the block type design. Main poles and auxiliary contact blocks: 3 main poles, front and side-mounted add-on auxiliary contact blocks (mechanically linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. NC mirror contacts compliant with Annex F of IEC 60947-4-1), control circuit: AC or DC operated, Accessories: a wide range of accessories is available.

ABB Lighting Contactor, 100 to 250 VAC/VDC Coil, 45 A Maximum Load Current, 15 hp Coil Power Rating, 3 Poles, 50/60 Hz, 3NO, 600 VAC Contact, AF26, Double Connector Screw Terminal, IP20, 10000000 Cycles Operating Cycles, -40 to 70 deg C Operating, 86 mm L x 45 mm W x 86 mm H

• Built-in surge suppression
• 15 hp at 480 VAC 3-phase motor rating

• Catalog https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/ABB_AF45_40_00_70_Catalog.pdf
• Full Engineering Drawing https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/ABB_AF26_30_00_13L_Full_Engineering_Drawing.pdf
• Instruction/Installation Manual https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/ABB_AF26_40_00_11_Manual.pdf
• RoHS https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/ABB_AF38_30_00_11_RoHS.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/ABB_AF26_30_00_13L_Specification_Sheet.pdf