Electrozad

Banner Engineering Valu-Beam® Photoelectric Sensor, Series: 912, Rectangle Shape, Diffuse Sensing Method, 760 mm Sensing, Infrared Sensing Beam, 4 ms Response, Switch Output, 24 to 250 VAC, 20 mA, 50/60 Hz Frequency, Quick-Disconnect Connection, LED Light Source, 36.6 mm L x 35.6 mm W x 77.5 mm H Size, NEMA 1/2/3/3S/4/4X/12/13/IP66 Enclosure, -20 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C

• Protected against transient voltages, false pulse on power-up
• Stainless steel hardware
• 912 series ac sensors can be destroyed from overload conditions
• Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load
• The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts
• Potentiometer located at rear of sensor
• Less than or equal to 5 Vrms at 750 mA load and less than or equal to 10 Vrms at 15 mA load on-state voltage drop
• Less than 1.7 mA off-state output leakage
• Reinforced thermoplastic polyester enclosure
• Light/dark operate

• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Banner_Engineering_SM2A912F_Specification_Sheet.pdf