Electrozad

The SST™ Communication Module connects Rockwell SLC 500 PLCs as a Master or Slave to scan or emulate PROFIBUS DP I/O. With the user-defined data space of 2064 bytes Input and 2064 bytes Output, the SST™ Profibus module provides a cost-efficient solution to connect SLC CPUs with large PROFIBUS networks. A 9-pin serial port included on the scanner allows for firmware upgrades in the field and the upload of I/O configurations. The SLC's processor logic scan and the PROFIBUS I/O scan are independent of each other. The SLC processor reads the scanner input data during its input scan and writes the output data during its output scan. The scanner reads input data from the Slaves and writes output data to the Slaves independent of what the SLC is doing. Slave status, diagnostic status information on all Slaves, network diagnostic counters and DP Master diagnostic counters are maintained by the scanner. The scanner does not require the set-up of a G-file in the SLC.

Woodhead® PLC Communication In Chassis Module, Series: 112016, 1 kV, 9-Pin D-Sub Female Terminal

• 100% backward compatible with previous generation (SST-PFB-SLC)
• Manages DP-V1 services including SLC ladder logic samples
• Doubling of M0 and M1 data area up to 1000 words
• Supports all profibus baud rates
• Simultaneous operation of profibus DP master and slave
• Flash memory for storage of DP master I/O configuration
• Fast, easy set up into SLC backplane, profibus I/O data is automatically mapped into the SLC's processor's I, O files and into MO and MI files residing on PB3-SLC
• Supports exported configuration files from the SST DP configuration software and Siemens COM profibus
• Multiple SST-PB3-SLC modules can be used in one SLC rack
• Windows 7, Windows 8/8.1, Windows server 2003, Windows server 2008, Windows server 2012, Windows Vista, Windows XP operating system
• PROFIBUS® DPV0 master, PROFIBUS® DPV0 slave protocol
• 1-channel
• 9.6 kbps up to 12 Mbps speed
• SST profibus DP master console software configuration
• 1-port
• For Rockwell automation SLC 500
• Siemens ASPC2 LAN controller, maximum of 125 slaves supported, 244 bytes I/O per slave
• Rockwell SLC™ 5/03 or higher bus interface
• Freescale coldfire MCF5272 protocol processor, altera cyclone II backplane processor
• 2 Mb of local coldfire SDRAM, 32 Mb of local NIOS DDR, 512 kB of onboard shared memory, 512 kB of sectored flash memory for storage of program and configuration data

• Catalog https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Woodhead_112016_0022_Catalog.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Woodhead_SST_PB3_SLC_E_Specification_Sheet.pdf