Electrozad

The Series 71, 72 and 76 Modutrol IV Motors are spring return and non-spring return motors used to control dampers and valves. The motors accept a current or voltage signal from an electronic controller to position a damper or valve at any point between open and closed.

Honeywell Modutrol IV™ Electric Motor, Series: M7285, 120 VAC, 7.2 FLA/43.2 A Locked Rotor, 50/60 Hz Frequency, NEMA 3 Frame, 3/8 in Shaft, CCW Rotation, 60 in-lb Torque, Footed Mounting, -40 to 150 deg F Ambient at 25% Duty Cycle, Die Cast Aluminum, 5-1/2 in W x 8-3/4 in D x 6-7/16 in H

• Integral junction box provides NEMA 3 weather protection
• Integral spring return returns motor to normal position when power is interrupted
• Spring return motors can operate valve linkages form power end or auxiliary end shafts for normally closed or normally open valve applications
• All models have dual shafts (slotted and tapped on both ends)
• All models have auxiliary switch cams
• Fixed torque throughout the entire voltage range
• Motors are designed for either normally open or normally closed valves and dampers
• Normally open/normally closed valves and dampers

• Instruction/Installation Manual https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Honeywell_M4185A1001U_Manual.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Honeywell_M7164A1017U_Specification_Sheet.pdf