The E series LED recessed Module gives you optimized value and performance you can trust. Available in 4" and a flexible 5" & 6" size, E series combines dependable performance and low cost with the virtually maintenance-free, energy saving benefits of 35,000 hour-life LED. Ideal for both retrofitting and new construction in a variety of residential and light commercial settings such as multifamily residences, retail shops and offices.
Lithonia Lighting® Retrofit LED Module, Dimmable IC/Non-IC, Series: 4BEMW, 120 VAC, LED Lamp, 10.3 W Lamp, E26 Lamp Base, 1 Lamps, Baffle Recessed Trim, 35000 hr Average Life, Matte White Light, 3000 K Color Temperature, 82 CRI, Diffused Glass Lens, 570 Lumens, Friction Clip Mounting, Aluminum Housing Material, 4-1/8 in ID x 5-1/4 in OD x 2-1/2 in H Dimensions
| Average Life |
: |
35000 hr |
| Color Rendering Index (CRI) |
: |
82 |
| Color Temperature |
: |
3000 K |
| Dimensions |
: |
4-1/8 in ID x 5-1/4 in OD x 2-1/2 in H |
| Lamp Base Type |
: |
E26 |
| Lamp Wattage |
: |
10.3 W |
| Lens Type |
: |
Diffused Glass |
| Light Color |
: |
Matte White |
| Lumens |
: |
570 Lumens |
| Mounting Type |
: |
Friction Clip |
| Number of Lamps |
: |
1 |
| Recessed Trim Type |
: |
Baffle |
| Series |
: |
4BEMW |
| Type |
: |
Dimmable IC/Non-IC |
| Lamp Type |
: |
LED |
| Voltage Rating |
: |
120 VAC |
| Housing Material |
: |
Aluminum |
- Recessed LED module is the most economical means to create a well lit environment with exceptional energy efficiency and near zero maintenance
- Great for retrofit into existing downlight cans or new construction and remodel applications, compliant friction clip retention allows fitment into nearly 100% of installed cans
- Compliant friction clip retention allows fitment into nearly 100% of installed cans
- The LED module maintains at least 70% light output for 35,000 hours
- Aluminum spun reflector with deep baffle configuration for reduced glare
- Inner reflector cone funnels light through the pressed-in diffused lens
- Diffused lens at end of mixing chamber to provide even light distribution for general illumination, equivalent to 65W BR30 lamp
- Center 2 Edge (patent pending) technology created for a single point source
- Primary power disconnect provided for simple connection to a dedicated LED connector in the housing
- Suitable for installation in standard height rough-in sections
- E Series' patent pending driver has zero inrush, which allows power loads to be calculated with actual rated wattages
- Friction clips allow fitment into cans with an inside diameter of 4 to 4.5 in
- -18 to 46 deg C temperature range
- 0.99 power factor
- 50/60 Hz input frequency
-
Specification Sheet
https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_4BEMW_LED_27K_M6_Data_Sheet.pdf