Electrozad

The 3RH2 contactor relays are available with screw or spring type terminals. The basic unit contains four contacts with terminal designations according to EN 50011. The 3RH2 contactor relays are suitable for use in any climate. They are finger safe according to IEC 60529. The 3RH21 coupling contactor relays for switching auxiliary circuits are tailored to the special requirements of working with electronic controls.

SIRIUS Contactor Relay, Standard, 50/60 Hz, 24 VAC Coil, 2NO-2NC, 1/10 A at 230/690 VAC, 0.15/10 A at 24/600 VDC Contact, 4 Pole, Rail/Snap-On/Threaded Mount, Screw Terminal, IP20, -25 to 55 deg C, 57.5 mm H x 45 mm W x 73 mm D

• High contact stability at low voltages and currents
• RC elements, varistors, diodes or diode assemblies (combination of a diode and a Zener diode) can be plugged onto all 3RH2 contactor relays from the front for damping opening surges in the coil
• Depending on the version, the solenoid coils of the coupling contactor relays are supplied without overvoltage damping
• The auxiliary switch block can easily be snapped onto the front of the contactor relays
• 10 A at 230 VAC/3 A at 400 VAC/2 A at 500 VAC/1 A at 690 VAC AC-15, 10 A at 24 VAC/3 A at 110 VAC/1 A at 220 VAC/0.3 A at 440 VAC/0.15 A at 600 VAC DC-12 contact rating
• Without coil circuit

• Catalog https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/SIRIUS_3RH2122_1AB00_Catalog.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/SIRIUS_3RH2122_1AB00_Specification_Sheet.pdf