Electrozad

Banner Engineering Valu-Beam® Photoelectric Sensor, Series: 912, Rectangle Shape, Retro Reflective Sensing Method, 0.15 to 9 m Sensing, Red Laser Sensing Beam, 4 ms Response, Switch Output, 24 to 250 VAC, 20 mA, 50/60 Hz Frequency, Quick-Disconnect Connection, LED Light Source, 36.6 mm L x 35.6 mm W x 77.5 mm H Size, NEMA 1/2/3/3S/4/4X/12/13/IP66 Enclosure, -20 to 70 deg C Operating, Environmental Conditions: 90% at 50 deg C

• Less than or equal to 5 V RMS at 750 mA load and less than or equal to 10 V RMS at 15 mA load on-state voltage drop
• Protected against transient voltages and false pulse on power-up
• Stainless steel hardware
• Use on low voltage requires careful analysis of the load to determine if the leakage current or on-state voltage of the sensor will interfere with proper operation of the load
• The false-pulse protection feature may cause momentary drop-out of the load when the sensor is wired in series or parallel with mechanical switch contacts
• Potentiometer located at rear of sensor
• 912 series non-polarized retroreflective mode photoelectric sensor
• Less than 1.7 mA off-state output leakage
• Light/dark operate
• SPST SCR solid state 2-wire output, 10 mA minimum load current, 750 mA to 50 deg C, 500 mA to 70 deg C maximum steady-state load capability, 4 A for 1 Sec (non-repetitive) inrush capability, less than or equal to 5 V RMS at 750 mA load and less than or equal to 10 V RMS at 15 mA load on-state voltage drop

• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Banner_Engineering_SM2A912F_Specification_Sheet.pdf