Electrozad

Kellems® Support Grips are used to hold the weight of electrical cable as it hangs in a vertical, sloping or horizontal position. Electrical cable must be supported, or its dead weight can cause excessive strain or pullout at the connections resulting in power failure. Support grips also absorb additional strain from flexure, vibration, expansion and contraction. Standard Support and Conduit Riser Grips are made of high grade, non-magnetic tin-coated bronze strands. Stainless steel grips, used for severe service or unusual environmental conditions are made of alloy 302 to 304 Stainless Steel.

Wiring Device-Kellems Support Grip, Standard Duty, 326 lb Breaking Strength, 2.5 to 2.99 in Cable, 21-1/2 in Mesh Length, Bronze, TiN Coated

• Strand equalizers position wires for equal loading throughout grip length
• Eye assemblies provide eye reinforcement at support hardware
• For support when cable end is not available
• Woven construction
• TiN coated support grip
• 3260 lb breaking strength

• Catalog https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Wiring_Device_Kellems_02201057_Catalog.pdf
• Instruction/Installation Manual https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_fe5dbed967cd4796e9028b45972dcb4a68683f8bd0bcba02105134f88f97a8b4.pdf
• Line Drawing https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_d6e49b044a4796ec48ab75f9907fa65e87bdb0dc7e14e24df799c75175bd8eb5.pdf