Non Stock
printPrint
  1. pin-int

Fluke® 8808A120V

Fluke® VolTect™ 8808A120V Digital Bench Multimeter, 1000 VDC, 750 VAC, 10A, 100 MOhm Measuring, 200 mVAC to 750 VAC, 200 mVDC to 1000 VDC, 200 mA to 10 A DC, 20 mA to 10 A AC, 200 Ohm to 100 MOhm, VFD Multi Segment Display

  • MPN: 8808A120V
  • UPC: 095969340137
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
Fluke® 8808A120V

Fluke® 8808A 5.5 digit multimeter has a broad range of functions, measuring volts, ohms and amps with a basic V dc accuracy of 0.01 %. It is remarkably easy to use, even by unskilled operators, because it makes the measurements you perform most often extremely easy and fast to do. Six setup buttons on the 8808A front panel operate like a car radio"s station presets. Simply set up the meter for a common measurement, then press shift followed by a setup button (S1 to S6) to save the setup. Now each time you perform that measurement, you simply press the appropriate setup key. It"s that easy.

Fluke® VolTect™ Digital Bench Multimeter, 1000 VDC, 750 VAC, 10A, 100 MOhm, 200 mVAC to 750 VAC, 200 mVDC to 1000 VDC, 200 mA to 10 A DC, 20 mA to 10 A AC, 20 Hz to 1 MHz, 200 Ohm to 100 MOhm, Safety Rating: CAT I 1000 V, CAT II 600 V, 0.015 + 0.003 for DC Voltage, 0.2 + 0.05 for AC Voltage, 0.02 + 0.003 for Resistance, 0.02 + 0.005 for DC Current, 0.3 + 0.06 for AC Current, 0.01% Frequency Accuracy, VFD Multi Segment, RS232, USB with Optional Adapter Interface, Yes, Yes, 3.46 in H x 8.56 in W x 11.7 in D, 0 to 50 deg C

Accuracy      :      0.015 + 0.003 for DC Voltage, 0.2 + 0.05 for AC Voltage, 0.02 + 0.003 for Resistance, 0.02 + 0.005 for DC Current, 0.3 + 0.06 for AC Current, 0.01% Frequency
Dimensions      :      3.46 in H x 8.56 in W x 11.7 in D
Diode Test      :      Yes
Frequency Rating      :      20 Hz to 1 MHz
Interface      :      RS232, USB with Optional Adapter
Peak Hold      :      Yes
Safety Rating      :      CAT I 1000 V, CAT II 600 V
Temperature Rating      :      0 to 50 deg C
Measuring Range      :      1000 VDC, 750 VAC, 10A, 100 MOhm
Voltage Rating      :      200 mVAC to 750 VAC, 200 mVDC to 1000 VDC
Amperage Rating      :      200 mA to 10 A DC, 20 mA to 10 A AC
Resistance      :      200 Ohm to 100 MOhm
Display Type      :      VFD Multi Segment
  • Fluke® 45 remote command emulation
  • Basic VDC accuracy of 0.01%
  • 5.5 digit resolution dual display
  • Dedicated DC leakage current measurement
  • 2 x 4 Ohm 4 wire measurement technique
  • Six dedicated buttons for fast access to instrument setups
  • High/low limit compare for pass/fail testing
  • Storage temperature - 40 to 70 deg C, peak hold, 100 samples/s with audible tone response time, 1.9999 V maximum reading, resolution- 0.1 mV fast rate
  • Threshold - 20 Ohm, test currents- 1 mA, maximum reading -199.99 Ohm, resolution - 0.01 Ohm, minimum/maximum, relative, hold, compare and dB functions
  • Designed to comply with EN 61010-1:2001, ANSI/ISA 61010-1 (S82.02.01):2004, UL 61010-1:2004, AN/CSA C22.2 No. 61010.1:2004
  • Resistance range - 200 to 100 MOhm with accuracy of (0.02 + 0.003)
  • Frequency range 20 Hz to 1 MHz with accuracy of 0.01%
  • pdfCatalog https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_727b6b4f716115e0a11d9369c8e3dc38a3faeafb9792aff54be553ca3ec09492.pdf