3M™ 5301 Non Stock
printPrint
  1. pin-int

3M™ 5301

054007-12263 5300 Motor Lead Splice Kit, 0 to 1000 VAC, 10 to 4, 12 to 4 AWG Conductor, 3.4 in L Splice, EPDM Rubber

  • MPN: 5301
  • UPC: 054007122630
  • Min. Order Qty: 1
  • Quantity Interval: 1
  • loading loading
3M™ 5301

3M™ 5300 Series Motor Lead Pigtail Splice Kit is perfect to use with copper compression, 1-hole lugs. It is designed to splice motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 VAC or less. The kit can make 3 splices and can be used on cables that can withstand a maximum temperature of 194 deg F (90 deg C).

3M™ Motor Lead Splice Kit, Series: 5300, 0 to 1000 VAC, 10 to 4, 12 to 4 AWG Conductor, 0.17 to 0.36 in OD in, 3.4 in, 1 Conductors, Pigtail Connector, 90 to 130 deg C, EPDM Rubber, Black, 4 in L

Color      :      Black
Connector Type      :      Pigtail
Dimensions      :      4 in L
Insulation Size      :      0.17 to 0.36 in OD in
Number of Conductors      :      1
Series      :      5300
Temperature Rating      :      90 to 130 deg C
Voltage Rating      :      0 to 1000 VAC
Conductor Size      :      10 to 4 AWG, 12 to 4 AWG
Splice Length      :      3.4 in
Material      :      EPDM Rubber
  • Fast and simple installation
  • No torches or heat source required
  • No special tools required to install splice
  • Thick walls to resist puncture and abrasion damage
  • High dielectric constant stress control included with 5/8 kV kits for shielded feeder cables for minimizing size and electrical stress
  • Easy re-entry, can be used on cables with a rated operating temperature of 90 deg C and an emergency overload rating of 130 deg C, to splice (insulate and seal) motor lead connections for 1000 VAC and less cables sized 16 AWG to 500 kcmil
  • Suitable for use with 30000 series copper compression lugs or other ul listed copper lugs
  • 365 V/mil dielectric strength
  • 750% elongation
  • 1400 psi tensile strength
  • 1/2 in maximum bolt length
  • Polyethylene cable
  • 10 to 4 AWG feeder cable, 12 to 4 AWG motor lead conductor size
  • pdfInstruction/Installation Manual https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_a0446e8458405e12fc018c3df1bc2f42db195efba984bcc53c4e157bc2a42db6.pdf
  • pdfSDS https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_81f9dba8aeffb3cd68b5c1daead8c056902f14d6321db2de323fd5bad0ed35c7.pdf
  • pdfSDS https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_8b6fa009fb1912e54572ee2ac86fa2408fb00f7fe1dfa3b78bc4607a1dafb914.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_52a5a1248987099209ec98ee6704460265404d02f19b76ae03e244a65783c27a.pdf
  • pdfSpecification Sheet https://assets.unilogcorp.com/2/ITEM/DOC/IDW_DOCUMENT_c5f9516ee10da7ea4bf957ca8042ecedc5e227264ef3cf02cfe2b02661c34034.pdf