Electrozad

The MS-LED-1H-180 has a 180 deg sensor and comes with one LED flood and mounting plate. The MS-LED-1H-180 is equivalent to a 300 W quartz unit with a total of 1800 lumens out of the fixture. Whenever the motion sensor detects motion the floodlight automatically turn on. The sensor is adjustable and can turn the light on from 5 sec to 12 min. Unit can be wired in parallel. Tested at -40 deg C start temperature. Available in black or white.

RAB Motion Sensor Light, On/Off, 120 VAC, Polycarbonate Housing Material, 180 deg Sensing, 5 sec to 7 min Time Delay, 180 deg Detection

• Outdoor wall mounted LED flood with sensor
• Body and mounting plate are made of die cast aluminum with a black powder coat paint finish
• LED flood consumes 27 W (1800 lumens)
• Sensor has photo electric control for 24 hour operation
• Sensor can be adjusted from 5 seconds to 12 minutes
• Sensor can detect in 180 deg out to 32.8 ft based on 8.25 ft mounting
• Operating temperature -40 to 50 deg C
• Standard unit comes with 1/2 in NPS threaded arm that fits on all standard boxes, covers and fixture knockouts
• Fixture can be mounted from the bottom or the side conduit access
• Bronze finish
• 200 W load

• Instruction/Installation Manual https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/RABMS_LED_1H_180_WH_Manual.pdf
• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/RAB_MS_LED_1H_180_WH_Specification_Sheet.pdf