Electrozad

LBD bodies are installed at 90 deg bends in rigid conduit to act as pull outlets for conductors that are stiff due to large size or type of insulation and to make 90 deg bends in conduit system while allowing straight wire pulls in either direction.

Ocal® Conduit Pulling Elbow, Double Coated, Series: LBD, 1-1/4 in Trade, 90 deg Angle, For Use With: IMC/Rigid Conduits, Iron, Gray, PVC Coated

• Pressure sealing sleeves seal connections
• Coated with a nominal 0.002 in (2 mil) blue urethane on both the interior and exterior before PVC coating is applied
• Nominal 0.04 in (40 mil) PVC coating bonded to exterior
• For conductors that are stiff due to large size or type of insulation and hazardous locations

• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_c8aff36ccf55bf6312dcd927666d010b43a929890306009f25453db76493f739.pdf