Electrozad

The DISCONNECTS 8146/5-6 series are horsepower rated for motor load applications. While the product is load rated, no short circuit protection is designed into the switch. To provide adequate short circuit protection, properly sized Class J fuses must be installed in the circuit upstream from the switch. Due to the design of the switch, no external sealing fittings are required for Class I, Division 2 applications. Some Class II applications may require installation of seals. Consult the National Electrical Code Article 502-5 or the Canadian Electrical Code Section 18 (154) for specific instructions. STAHL offers the DISCONNECT Series 8146/5-6 constructed to meet the most demanding environments. The Disconnect 8146/5-6 Series provides safety in hazardous and corrosive locations.

R. STAHL Hazardous Location Disconnect Switch, Series: 5/6/8146, 600 VAC, 220 VDC, 16 A, 10 hp, 3 Pole, Padlocking Handle Actuator, NEMA 3/4/4X/IP66 Enclosure, 316 Stainless Steel Screw Terminal, -4 to 104 deg F, 7.3 in H x 6.7 in W Dimensions, Fiber Reinforced Polyester

• Enclosures made of fiberglass reinforced polyester (FRP) with recessed polyurethane gasket and captive stainless steel cover screws
• 3-pole (plus auxiliary) horsepower rated switch
• Increased safety terminals and integrated ground bar
• Large grip, lockable handle
• Integrated ground bar
• -40 to 131 deg F storage temperature rated
• 20 A max class J back-up fuse required
• No entry and hubs
• Vibration resistant increased safety terminal

• Catalog https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/R_STAHL8146_5_602_0000_Catalog.pdf