Electrozad

Weidmuller Solid State Relay, Series: TERM, 20 mA/8 A, 480 mW Power, 0.1 Hz Frequency, DPDT Contact Form, 2 Pole, DIN Rail Mounting, Screw Terminal, -40 to 60 deg C, 3.528 in H x 0.504 in W x 3.457 in D Dimensions

• 24 VDC +/- 20% control voltage rating
• 17 V/3 VDC pull-in/drop-out voltage, 14 mA/2 mA DC pull-in/drop-out current
• Green LED status indicator, free-wheel diode, reverse polarity protection protective circuit, 24 VDC coil voltage of the replacement relay
• 250 VAC/VDC rated switching voltage, 15 A/4 s inrush current
• 20 mA rated current DC, 8 A continuous current
• <=6 ms switch-on delay, <18 ms switch-off delay, 10 mA at 10 VAC, 100 mA at 5 VAC minimum switching power
• 2 CO contact (AgNi), 30 x 10^6 switching cycles mechanical service life
• 300 VAC rated voltage, >=5.5 mm creepage and clearance distance input output, 1.2 kVeff/5 s dielectric strength input output, 4 kVeff/1 min dielectric strength to mounting rail, 2.5 kVeff dielectric strength of neighboring contacts, 1 kVeff/1 min dielectric strength of open contact, 6 kV (1.2/50 us) impulse withstand voltage
• IP20 protection degree, 2 pollution severity, III surge voltage category
• 8 mm stripping length, rated connection
• Size PH0 blade
• A1, B1 gauge to IEC 60947-1
• Rigid copper conductor, flexible copper conductor
• -40 to 85 deg C storage temperature
• 0.1 Hz maximum switching frequency at rated load
• 2000 VA AC switching capacity (resistive) maximum, 162 W at 24 VDC switching capacity (resistive) maximum
• TRS 24VDC 2CO type
• 0.4 Nm tightening torque
• 2.5 to 0.14 sq-mm clamping range, rated connection
• 14 to 26 AWG wire connection cross-section, 2.5 to 0.14 sq-mm solid wire cross-section