Electrozad

Designed for mounting heights of up to 45 ft (13.72 m), the CMR 6 series High Bay 360 deg occupancy sensor provides Passive Infrared (PIR) detection over a 15 to 20 ft (4.57 to 6.10 m) radial coverage pattern that overlaps the areas lit by a typical high bay fixture. This line voltage Sensor Switches loads directly without the need for a power pack. The CMR 6 sensor is ideal for individual on/off control of T5/T8 fluorescent lighting. HID bi-level lighting can also be controlled when the Start-to High(SH) option is added to the CMR 6.

Sensor Switch™ Sensor Switch® Occupancy Sensor, Line Voltage, Series: CMR, 120/277 VAC, 1/4 hp Power, PIR Sensor, 45 ft Coverage, 360 deg Viewing, 30 s to 20 min Time Delay, 50/60 Hz Response, Flush Mounting, Plastic, White, 4.55 in Dia x 1.55 in D Dimensions

• 100% digital PIR detection, excellent RF immunity
• Self-contained relay, no power pack needed
• No minimum load requirements
• Compatible with electronic and magnetic ballasts, CFLs, LED and incandescent
• Interchangeable hot and load wires, impossible to wire backwards
• Push button programmable
• Non-Volatile settings memory
• Adjustable time delays
• No field calibration or sensitivity adjustments required
• Convenient test mode
• 100 hr lamp burn-in timer mode
• Green LED status indicator
• 3.5 in octagon box
• 40 ballasts at 0.5 mA dimming load

• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/Lithonia_Lighting_CM_6_R_Specification_Sheet.pdf