Electrozad

The vertical cable manager shall be capable of mounting to EIA racks to manage cables on the front and rear of the rack. The manager shall be molded out of plastic and possess cable management fingers and pass through holes. The fingers shall provide integral bend radius control and be spaced so that the gaps between the fingers align with EIA rack spaces. The pass through holes shall provide bend radius control, will have adequate space for pre-terminated media, and slots that can be used for securing of cable straps. The vertical manager shall have a dual hinged metal door that can be opened to the left or right 110 deg. The manager shall be able to accept wire retainers that can be snapped on the cable management fingers. The manager shall accept 19 in EIA accessories such as strain relief bars and PDU mounted vertically in a zero RU format.

Panduit® NetRunner™ Cable Manager, Front Only High Capacity Single Sided Vertical, 170 mm Width, 190 mm Depth, 80.8 in Height, 45RU, For Use With: EIA Rack, ABS, Black

• Align with rack spaces to support cables as they transition to the vertical pathway
• Accommodates up to 24 Cat 6A cables eliminating the need to remove fingers for cable routing speeding installation
• Integral cable retainer on the end of each finger to contain cables within each rack unit
• Provides more capacity for newer or augmented switches and higher cable counts
• Allows mounting of many standard EIA 19 in accessories vertically in the front or back of the manager
• Easy open and close door
• Allows large pass-through for Cat 6, 6A cables or QuickNet™ pre-terminated MTP cassettes and for increased air flow

• Specification Sheet https://uat.south.electrozad.com//ASSETS/DOCUMENTS/ITEMS/EN/IDW_DOCUMENT_c4e7322a5f6f1ca2f1b7f77c6f727d3ed2359be35e66b52d8b750841db6ae62c.pdf